Program keyless remote 2008 chrysler town country

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you! Time needed: 5 minutes. After 10 seconds, the vehicle will chime to indicate successful entry into Programming Mode. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

If you have any difficulties with programming your vehicles, contact us at [email protected]. No ifs, ands, or buts! Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do. Turn ignition OFF and remove key. Within 15 seconds insert second programmed key into ignition switch and turn ignition ON. After 10 seconds an audible tone will be heard and immobilizer warning lamp will flash.

Turn ignition OFF and remove second programmed key. Within 60 seconds insert non-programmed key into ignition switch and turn ignition ON. After 10 seconds an audible tone will be heard and immobilizer warning lamp will illuminate for 3 seconds.

Switch ignition OFF. Remove key. Check operation of programmed key transmitter. Test your remote to see if the programming was successful. Matthew Fortuna is a full-time freelance writer with a journalism degree from Wayne State University, living in the Detroit metropolitan area. Step 1 Press the lock button on your Chrysler remote five consecutive times at brief two second intervals. Step 2 Place your key in the car's ignition and turn it to the right two clicks to the "Run" position on all Chrysler cars.

Step 3 Hold the unlock button.